Internet-Draft Mission Architecture July 2026
McGuinness Expires 6 January 2027 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-mcguinness-mission-architecture-latest
Published:
Intended Status:
Informational
Expires:
Author:
K. McGuinness
Independent

An Architecture for Mission-Bound Authorization

Abstract

A Mission is a durable, approval-backed governance object for authorization: the approved task, with a lifecycle, that authority is derived for, bound to, and gated on. It is not a new way to express authority. The Mission model spans a core issuance profile, two further bindings, and optional companion profiles, and no single document shows how the pieces fit. This document is that structural view: the roles and components, the substrate primitives the companions consume, the layers the profiles form, the deployment patterns, and the requirements the family answers. It is Informational: it defines no protocol, object, or requirement, and every mechanism it names is defined by the profile it points to.

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://mcguinness.github.io/draft-mcguinness-oauth-mission/draft-mcguinness-mission-architecture.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-mcguinness-mission-architecture/.

Source for this draft and an issue tracker can be found at https://github.com/mcguinness/draft-mcguinness-oauth-mission.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 6 January 2027.

Table of Contents

1. Introduction

A Mission is a durable governance object created by an explicit approval event: the approved task, with a lifecycle. Authority for the task is derived for the Mission, bound to it, and gated on its state. The Mission is not a new way to express authority: Rich Authorization Requests [RFC9396] and kindred mechanisms express authority, and the Mission is the approved task that authority serves.

The model is deliberately decomposed: a core profile (the "issuance profile", [I-D.draft-mcguinness-oauth-mission], here "the core") defines the object and its OAuth 2.0 [RFC6749] binding, a standalone binding hosts the same object without changing an existing Authorization Server ([I-D.draft-mcguinness-mission-authority-server]), an AAuth binding gives that protocol's native mission concept the model's structure and lifecycle ([I-D.draft-mcguinness-mission-aauth]), and optional companions layer approval, lifecycle, enforcement, runtime, delegation, and proof capabilities on top. The decomposition keeps each interface small but spreads the structure across many documents and three bindings; this document is the single structural view.

It defines no protocol, no object, and no requirement. It is a map, not the territory: every mechanism named points at the profile that normatively defines it, and where this document and a profile appear to differ, the profile governs.

2. Status: An Informational Architecture

This document is Informational. It establishes no conformance class and defines no new mechanism, claim, or wire format. Where it uses words like "must" or "should," they carry their ordinary English meaning and describe what a referenced profile establishes, not a requirement this document places. Terms are the core's; Policy Enforcement Point (PEP), Policy Decision Point (PDP), and consequential action are the runtime profile's ([I-D.draft-mcguinness-mission-runtime]); Mission Authority Server (MAS) is defined by [I-D.draft-mcguinness-mission-authority-server]; the AAuth binding is defined by [I-D.draft-mcguinness-mission-aauth].

Its boundary with the Mission Security Model ([I-D.draft-mcguinness-mission-security-model]) is deliberate: this document describes components, interfaces, and data flows; the security model describes the trusted base and how each component's compromise degrades the guarantees. Each profile's own Security Considerations remain normative over both.

3. The Mission

OAuth 2.0 issues access tokens for individual resource requests; it has no durable, approved artifact for the larger task a client pursues on a user's behalf. That matters for AI agents: given a mission (book the trip, reconcile the ledger), an agent takes many actions across many resources over a long time, spawning sub-agents and surviving restarts, and independently issued tokens cannot express the approved task, its boundary, or its end (the core's Introduction).

The family separates the task from the authority. The Mission is the approved task, with a lifecycle; the Authority Set is the concrete authority (resources, actions, constraints) derived for it. A Mission is not another authorization_details type: it is the durable, approval-backed object an Authority Set is derived for and gated by (the core's Why a New Object section).

A client proposes a Mission Intent; the Mission Issuer derives an Authority Set for it; an approval event commits both and creates the Mission. The commitment is two integrity anchors, intent_hash over the approved Mission Intent and authority_hash over the consented Authority Set, each computed over a domain-separated, issuer-bound envelope with fixed canonicalization, so an auditor can reproduce either digest from the record alone (the core's Mission Approval, Integrity Anchors, and Canonicalization Rules sections). The record is immutable except for its state (the Mission Record section).

The core lifecycle states are active, revoked, and expired, and only active permits issuance or continued reliance. Companions add states (suspended, completed, superseded, cascaded), and one rule keeps that safe without a registry: a consumer treats every state other than the exact value active, including one it does not recognize, as non-active, so an unrecognized state fails safe (the core's Mission Lifecycle and Gating section).

4. Mission Roles and Components

For each component: what it does, what it holds, and which document specifies it. What its compromise costs is the security model's subject ([I-D.draft-mcguinness-mission-security-model]).

Agent (client):

Proposes the Mission Intent and executes the task; in the OAuth binding it holds derived Mission-bound tokens; outside the trusted base and assumed compromisable ([I-D.draft-mcguinness-oauth-mission]).

Subject:

The user or system on whose behalf the Mission is approved, an (iss, sub) pair recorded immutably at approval (the core).

Approver:

The single accountable principal who approves the Mission; equal to the Subject for self-approval (the core's Single Accountable Approver section).

Mission Issuer:

Validates the Mission Intent, runs the approval event, records the Mission, and owns its state. Three bindings. OAuth Authorization Server: every derived token carries the mission claim, and issuance and refresh are gated on Mission state ([I-D.draft-mcguinness-oauth-mission]). Mission Authority Server: the same record, anchors, and lifecycle without issuing tokens; the PDP joins ordinary credentials to the Mission at the point of use ([I-D.draft-mcguinness-mission-authority-server]). AAuth Person Server: the mission blob carries the record under AAuth's s256 commitment, and the Person Server issues or gates every auth token, so issuance gating holds ([I-D.draft-mcguinness-mission-aauth]).

Resource Server:

The protected resource. In the OAuth binding it enforces statelessly from the token and can check the mission claim (the core's Resource Server Enforcement section); in the standalone binding the token carries no Mission signal, and Mission properties reach it only through the enforcement path.

PEP and PDP:

The PEP sits at the last controllable boundary before an action and obtains a permit for each consequential action; under mediated custody it, not the agent, holds the sender-constraint key. The PDP evaluates the action against the Mission's authority, constraints, actor chain, and current state, and fails closed ([I-D.draft-mcguinness-mission-runtime], [I-D.draft-mcguinness-mission-authzen]); in the standalone binding it also verifies the subject and client join (the MAS's Mission Join section).

Agent harness:

Hosts the agent; binds sessions, task graphs, queues, cached tool connections, and sub-agent handles to Mission state; establishes the environment with no unmediated path to mediated actions ([I-D.draft-mcguinness-mission-harness]).

Orchestrator:

Assigns each workflow step a reversibility class, records an unwind plan before dispatch, and compensates in-flight work when a Mission stops ([I-D.draft-mcguinness-mission-orchestration]).

Transparency Service:

An append-only SCITT log [RFC9943] that registers Mission evidence as Signed Statements and issues receipts verifiable offline ([I-D.draft-mcguinness-mission-audit]).

Verifiers:

Parties outside the deployment that check Mission facts without a token exchange: Mandate verifiers confirm what was approved ([I-D.draft-mcguinness-mission-mandate]); evidence consumers check consent, decision, and execution evidence against the anchors and receipts ([I-D.draft-mcguinness-oauth-mission-consent-evidence], [I-D.draft-mcguinness-mission-authzen]).

The bindings converge on one object, and enforcement draws on it regardless of binding:

      Subject        Approver
          \             |
           \      approval event
            \           |
  +----------------------------------------+
  |             Mission Issuer             |
  | +----------------+ +-----------------+ |
  | | OAuth AS:      | | Standalone MAS: | |
  | | Mission-bound  | | no tokens; the  | |
  | | tokens gated   | | PDP joins       | |
  | | on state       | | credentials     | |
  | +-------+--------+ +--------+--------+ |
  +---------|-------------------|----------+
            v                   v
       the Mission: intent_hash,
    authority_hash, lifecycle state
                  |
                  | state and authority (claim,
                  | introspection, Status, Signals)
                  v
  Agent ------> PEP ----------> PDP
  (harness,      |  <- permit -
  orchestrator)  v
          Resource Server

5. The Mission Substrate

The companion profiles named without "oauth" are defined against the Mission model's substrate primitives rather than against OAuth mechanics; each names what it consumes in a Mission Substrate section of its own. This section consolidates that interface: six primitives, each with its normative home and its consumers. Every sentence mirrors a rule the named profile states normatively.

5.1. The Mission Identifier and Origin

An opaque, non-reused mission_id with at least 128 bits of entropy and no semantic content, plus origin, the issuer URL of the approving Mission Issuer; together they name exactly one Mission. Home: the core's Mission Record and Mission Identifier Format sections. Consumed by every companion: enforcement decisions, evidence, harness bindings, the state surfaces, the audit statement subject, and the Mandate all key on it.

5.2. The Lifecycle State Space

The states of Section 3, open to companion-defined states, with the only-active rule, fail-safe unrecognized states, and a freshness source with a stated staleness bound. Home: the state space and the only-active rule are the core's (its Mission Lifecycle and Gating section); the freshness mechanisms and staleness bounds are the status and runtime profiles'; Status and Signals add the observation surfaces. Consumed by the runtime layer (per-class re-check, fail closed on staleness), the harness (pause, suppress, terminate), the orchestrator (the unwind trigger), and the Mandate (state only as of minting).

5.3. The Authority Set Representation

An array of authorization details entries ([RFC9396] in the OAuth binding), each naming a resource, actions, and constraints, governed by the subset rule (derived or delegated authority is never broader) and the Common Constraints vocabulary (registered names with fixed subset and intersection rules). Home: the core's Mission Authority section, with its Subset Rule and Common Constraints subsections. Consumed by the runtime layer and AuthZEN binding (evaluation), the MAS (served to the PDP), Expansion and Completion (growth and retirement), Child Delegation and Offline Attenuation (narrowing), Consent Evidence (rendering), and the Mandate (optional carriage).

5.4. The Integrity-Anchor Envelope

A committed object is hashed over an envelope domain-separated by typ and issuer-bound by iss, canonicalized by fixed rules, and encoded with an algorithm prefix a verifier recognizes or rejects; the typ space is an extension point for new committed objects. Home: the core's Integrity Anchors and Canonicalization Rules sections, with the extension rule in its Extensibility section. Consumed by Consent Evidence (consent_rendering_hash), Shaping (Shaping Evidence), the runtime layer and AuthZEN binding (mission-policy-view), Orchestration (unwind_plan_hash), the Mandate (the encoded digest form), and Audit Transparency (the committed evidence types it registers).

5.5. The Mission-Bound Credential

A credential carrying the mission claim (id, origin, authority_hash) and Mission-derived authorization details, issued only while the Mission is active. Home: the core's Mission-Bound Access Tokens and The Mission Claim sections.

This is the binding-dependent primitive, and it is exactly where the bindings split. The OAuth and AAuth bindings provide it (the AAuth auth token carries the mission claim under per-request signature coverage, [I-D.draft-mcguinness-mission-aauth]); the standalone binding does not: the MAS's Mission Substrate section states that a MAS provides every other primitive unchanged and provides neither this credential nor issuance gating ([I-D.draft-mcguinness-mission-authority-server]). The seam is the runtime profile's Mission binding establishment step ([I-D.draft-mcguinness-mission-runtime]): the credential carries the Mission reference where the binding provides one, and a binding without it supplies an externally established reference, verified under a join the binding defines, which the MAS profiles as its Mission Join. Offline Attenuation attenuates this credential and the token-carriage aspects of delegation ride it, so both require it; every other companion routes through the binding establishment step, which is what makes the standalone binding possible.

5.6. The Audit Horizon

The deployment-declared retention window for the Mission record and its evidence: at least the Mission's lifetime plus a declared post-terminal period. Home: the core's Mission Record section. Consumed by Consent Evidence, runtime evidence, and Audit Transparency for retention; by the MAS for record retention; and by the security model's retention analysis.

5.7. The Binding Checklist

For a new binding this checklist is now normatively stated by Mission Substrate Requirements ([I-D.draft-mcguinness-mission-substrate]); this section remains the informative summary, and the three existing bindings remain authoritative for themselves.

Another mission-based protocol hosts the substrate-neutral profiles unchanged when it provides:

  1. a unique, opaque Mission identifier with an authoritative origin;

  2. the lifecycle state space with the only-active rule, fail-safe unrecognized states, and a freshness source with a staleness bound;

  3. an Authority Set representation with a subset rule and a shared constraint vocabulary;

  4. the integrity-anchor envelope and canonicalization for every object it commits;

  5. an audit horizon over the record and its evidence;

  6. published key material: the issuer's signing keys, resolvable by the verifiers of its signed artifacts; and

  7. optionally, a Mission-bound credential carrying the mission claim; a substrate that omits it composes as the standalone binding does, and the credential-carriage profiles do not apply.

Individual profiles name further inputs in their Mission Substrate sections: the evidence types and their canonical bytes for audit transparency, and the intent submission channel for shaping. The per-profile Mission Substrate sections remain the authoritative per-consumer statements of this interface; this section consolidates them and adds nothing.

6. Mission Layers

The family organizes along a verb spine: each layer answers one question, sits on one trust boundary, and is owned by named documents.

 propose      Intent Shaping (client side, untrusted)
                        |
 approve      Mission Issuer: the OAuth AS, Mission
 and record   Authority Server, or AAuth Person Server
              binding (+ Consent Evidence, Deferred
              Approval)
                        |
              the Mission: intent_hash,
              authority_hash, lifecycle state
                        |
 govern       Status (pull), Signals (push),
              Expansion (widen), Completion (retire)
                        |
 enforce      Runtime contract -> AuthZEN binding:
 each action  a PDP permit before every consequential action
                        |
 run and      Harness (continuity is not authority),
 wind down    Orchestration (unwind in-flight work)

 delegate     Child Delegation, Offline Attenuation

 prove        Consent Evidence, Mandate, Audit

 analyze      Security Model (the trusted base)

6.1. Propose

The question: how does a user's request become a candidate Mission Intent? The boundary: the client side; output is untrusted until the Mission Issuer validates and narrows it. Owner: Intent Shaping ([I-D.draft-mcguinness-mission-shaping]); the proposal enters via Pushed Authorization Requests [RFC9126] or the MAS submission endpoint.

6.2. Approve and Record

The question: how does a proposed task become an approved, committed Mission? The boundary: the Mission Issuer's own; the approval event is where trust is created. Owners: the three bindings ([I-D.draft-mcguinness-oauth-mission], [I-D.draft-mcguinness-mission-authority-server], [I-D.draft-mcguinness-mission-aauth]), Consent Evidence ([I-D.draft-mcguinness-oauth-mission-consent-evidence]) committing the disclosure shown to the Approver, and Deferred Approval ([I-D.draft-mcguinness-oauth-mission-approval]), the OAuth binding's asynchronous path, with an experimental companion adding an in-review narrowing negotiation; the standalone and AAuth bindings are natively asynchronous. Where the experimental progressive authorization companion is used, the initial approval also consents an authority ceiling for later staged widening ([I-D.draft-mcguinness-oauth-mission-expansion]).

6.3. Govern

The question: how do consumers observe Mission state, and how does authority grow or retire mid-task? The boundary: between the issuer and every consumer relying on state. Owners: Status, the signed pull surface with a lifecycle endpoint ([I-D.draft-mcguinness-oauth-mission-status]); Signals, the push complement ([I-D.draft-mcguinness-oauth-mission-signals]); Expansion, widening only via an approved successor ([I-D.draft-mcguinness-oauth-mission-expansion]); Completion, per-entry discharge ([I-D.draft-mcguinness-oauth-mission-completion]); and Management, fleet enumeration and bulk lifecycle for operators ([I-D.draft-mcguinness-oauth-mission-management]).

6.4. Enforce Each Action

The question: is this specific action, with these parameters, permitted under this Mission now? The boundary: the last controllable point between agent and resource. Owners: the runtime profile, the decision contract with parameter binding, custody, and fail-closed behavior ([I-D.draft-mcguinness-mission-runtime]); its AuthZEN binding, the concrete decision API and evidence objects ([I-D.draft-mcguinness-mission-authzen]).

6.5. Run and Wind Down

The question: how does governed work start, persist, pause, and unwind when Mission state changes? The boundary: the operator's execution environment around the agent. Owners: the harness, binding session continuity to Mission state ([I-D.draft-mcguinness-mission-harness]); Orchestration, unwinding in-flight work through reversibility classes and recorded unwind plans ([I-D.draft-mcguinness-mission-orchestration]).

6.6. Delegate

The question: how does authority reach a sub-agent without widening? The boundary: between principals acting under one approval. Owners: Child Delegation, child Missions with lineage, strict-subset authority, and cascade revocation ([I-D.draft-mcguinness-oauth-mission-child-delegation]); Offline Attenuation, narrower Mission-bound tokens minted off the issuer's hot path ([I-D.draft-mcguinness-oauth-mission-attenuation]). Offline attenuation requires the runtime enforcement layer: its kill switch is the runtime state re-check. Both build on the actor chain of the core's Delegation Within a Mission section.

6.7. Prove

The question: what can a party outside the deployment verify about what was approved and done? The boundary: across trust domains and time; the verifier holds no session with the issuer. Owners: Consent Evidence ([I-D.draft-mcguinness-oauth-mission-consent-evidence]); the Mandate, a signed, portable statement that authorizes nothing ([I-D.draft-mcguinness-mission-mandate]); Audit Transparency, the append-only evidence log ([I-D.draft-mcguinness-mission-audit]).

6.8. Analyze

The question: which components must be trusted, and what does each one's compromise cost? The boundary: the whole system. Owner: the Mission Security Model ([I-D.draft-mcguinness-mission-security-model]).

7. Mission Deployment Patterns

The OAuth binding stacks two independent chokepoints. Issuance gating acts at the token layer: a revoked or expired Mission stops all further derivation and refresh, and short-lived tokens age out. Runtime enforcement acts at the action layer: each consequential action is re-checked against current state at the point of use. Issuance gating plus runtime enforcement is strictly stronger than either alone: a gap in PEP coverage is still bounded at the token layer, and an outstanding token is still stopped at the action layer.

The standalone mode trades the token-layer kill switch for zero Authorization Server changes. A MAS creates, approves, and serves Missions while tokens remain ordinary; the PDP joins credentials to Missions, and the MAS is the freshness source. The cost is structural: no mission claim travels, revoking a Mission stops nothing at the token layer, and enforcement rests entirely on PEP coverage, so a token exercised outside that coverage is ungoverned (the MAS's Limitations section). The upgrade path is the issuance profile; the record, anchors, and lifecycle carry over unchanged.

In sequence, the standalone mode runs submit, poll, approve, join, permit:

 Client               MAS                Approver     PEP/PDP
   |                    |                  |            |
   | 1 submit Intent    |                  |            |
   |------------------->|                  |            |
   | 2 202 pending      |                  |            |
   |<-------------------|                  |            |
   |                    | 3 disclose       |            |
   |                    |----------------->|            |
   |                    | 4 approve        |            |
   |                    |<-----------------|            |
   |                    | Mission active   |            |
   | 5 poll             |                  |            |
   |------------------->|                  |            |
   | 6 approved,        |                  |            |
   |   mission_id       |                  |            |
   |<-------------------|                  |            |
   | 7 action, token,   |                  |            |
   |   Mission ref      |                  |            |
   |--------------------------------------------------->|
   |                    | 8 signed status: |            |
   |                    |   active         |            |
   |                    |<------------------------------|
   |                    |------------------------------>|
   |                    |                  | 9 join;    |
   |                    |                  |   evaluate |
   | 10 permit          |                  |            |
   |<---------------------------------------------------|

The token in step 7 is an ordinary OAuth token from the unchanged AS; steps 8 through 10 are the Mission Join and the runtime decision (the MAS's Mission Join section), and the MAS's staged walkthrough of the same flow is its end-to-end appendix ([I-D.draft-mcguinness-mission-authority-server]).

The bundles progress cumulatively. Baseline issuance is the core alone: approved, integrity-bound Missions, state-gated issuance, a possession-independent kill switch; audit, not action-time defense. The enforced bundle adds the runtime profile, its AuthZEN binding, and a freshness source: per-action permits and prompt revocation, the minimum for an agent taking consequential actions. The governed bundle, recommended for AI agents, adds Consent Evidence and the harness, growing with Child Delegation, Expansion, and Orchestration as needed; resistance to a compromised agent comes not from the bundle but from meeting all four conditions of the runtime profile's agent-compromise-resistant enforcement. Standalone governance is the same progression entered through the MAS, with the runtime layer mandatory from the start. Throughout, every companion is optional; each profile states its own scoped conformance, and the bundles are guidance, not a conformance class.

8. Mission Requirements

The requirements the family answers, stated implementation-neutrally; each names its answering documents by short form (Section 9). They stand on their own: a reader evaluating another design can use them as a checklist.

8.1. Context and Intent

  • R1: The task an agent pursues is a durable, structured, approved object (oauth-mission; mission-authority-server).

  • R2: The task and its derived authority are integrity-committed at approval, reproducible from the record alone (oauth-mission).

  • R3: Task proposals are untrusted input: fields the agent can influence never derive, widen, or gate authority (oauth-mission; mission-shaping).

8.3. Lifecycle

  • R8: Reliance is gated on task state: only active permits it, and unrecognized states fail safe (oauth-mission).

  • R9: Revocation is independent of credential possession, and state changes propagate by pull or push (oauth-mission; oauth-mission-status; oauth-mission-signals).

  • R10: A task can be suspended and resumed without being terminated (oauth-mission-status).

  • R11: Authority widens only through a fresh approval that creates a successor (oauth-mission-expansion).

  • R12: Authority retires per entry when the work an entry served is done (oauth-mission-completion).

8.4. Delegated and Enforced Execution

  • R13: Derived and delegated authority only narrows (oauth-mission; oauth-mission-attenuation).

  • R14: Sub-agents receive authority by explicit delegation with lineage, fan-out control, and cascade revocation, never by session ancestry (oauth-mission-child-delegation).

  • R15: Each consequential action is checked at the point of use, the permit bound to the concrete parameters (mission-runtime; mission-authzen).

  • R16: When a task stops, governed work stops with it and in-flight work unwinds safely (mission-harness; mission-orchestration).

  • R17: Task evidence is tamper-evident and verifiable outside the deployment (mission-audit; mission-mandate).

9. Mission Document Map

One line per document, grouped as the family groups them; the short form drops the draft-mcguinness- prefix. The naming encodes a boundary: profiles extending the Authorization Server's own surfaces keep "oauth" in their names; profiles defined against the substrate of Section 5 are named without it. This document is named without it because the architecture is substrate-neutral by construction.

Table 1
Group Document Defines
The model and its bindings oauth-mission The core issuance profile: the Mission, the approval event and anchors, the mission claim, the subset rule, state-gated issuance.
  mission-authority-server The standalone Mission Issuer and the PDP join of ordinary credentials to Missions.
  mission-aauth The AAuth binding: the Person Server as Mission Issuer, the mission blob as the record under AAuth's s256 commitment, issuance gating at the token endpoint.
  mission-substrate Normative requirements on any further binding of the model; the existing bindings and the core are unchanged by it.
Approval time mission-shaping Client-side shaping of a user's request into a candidate Mission Intent, as untrusted proposal.
  oauth-mission-consent-evidence The consent_rendering_hash anchor and signed evidence of what the Approver was shown.
  oauth-mission-approval Asynchronous approval over the deferred substrate.
  oauth-mission-approval-revision Experimental: in-review narrowing revision of a deferred proposal.
Lifecycle oauth-mission-status The signed pull surface and the lifecycle endpoint, with suspended and completed.
  oauth-mission-signals Experimental: a signed event per lifecycle transition, push or poll.
  oauth-mission-expansion Widening through an approved successor Mission.
  oauth-mission-progressive Experimental: policy-adjudicated expansion within a pre-consented ceiling.
  oauth-mission-management Fleet enumeration and bulk lifecycle operations for operators and incident response; dry-run-first, per-Mission semantics.
  oauth-mission-completion Per-entry discharge via the terminal_when constraint.
  oauth-mission-cross-domain Single-hop projection of a Mission to another trust domain via the cross-domain grant ([I-D.draft-mcguinness-oauth-mission-cross-domain]).
Runtime enforcement mission-runtime The per-action decision contract: parameter binding, custody, fail-closed behavior.
  mission-authzen The concrete decision-API binding and its Decision and Execution Evidence objects.
  mission-metering Experimental: cumulative consumption bounds and the metering that enforces them.
Agent runtime mission-harness Binding sessions, queues, and sub-agent handles to Mission state; the mediated environment.
  mission-orchestration Reversibility classes, unwind plans, and compensation after a stop.
Sub-agents oauth-mission-child-delegation Child Missions with lineage, strict-subset authority, cascade revocation.
  oauth-mission-attenuation Narrower Mission-bound tokens minted offline; the kill switch preserved by runtime re-check.
Proof and portability mission-mandate A signed, portable statement of a Mission's committed facts; evidence, not a credential.
  mission-audit Registration of Mission evidence in a SCITT Transparency Service; receipts verifiable offline.
Security model mission-security-model The trusted base in one view: what each component must achieve and what its compromise costs.

10. Security Considerations

This document introduces no mechanism and therefore no new security considerations. The consolidated trusted base and compromise analysis are the Mission Security Model's ([I-D.draft-mcguinness-mission-security-model]), and each profile's own Security Considerations remain normative.

11. IANA Considerations

This document makes no IANA request.

12. Informative References

[I-D.draft-mcguinness-mission-aauth]
McGuinness, K., "Mission-Bound Authorization for AAuth", Work in Progress, Internet-Draft, draft-mcguinness-mission-aauth, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-aauth>.
[I-D.draft-mcguinness-mission-audit]
McGuinness, K., "Mission Audit Transparency", Work in Progress, Internet-Draft, draft-mcguinness-mission-audit, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-audit>.
[I-D.draft-mcguinness-mission-authority-server]
McGuinness, K., "Mission Authority Server", Work in Progress, Internet-Draft, draft-mcguinness-mission-authority-server, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-authority-server>.
[I-D.draft-mcguinness-mission-authzen]
McGuinness, K., "Mission-Bound Runtime Enforcement: AuthZEN Profile", Work in Progress, Internet-Draft, draft-mcguinness-mission-authzen, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-authzen>.
[I-D.draft-mcguinness-mission-harness]
McGuinness, K., "Mission-Aware Agent Harnesses", Work in Progress, Internet-Draft, draft-mcguinness-mission-harness, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-harness>.
[I-D.draft-mcguinness-mission-mandate]
McGuinness, K., "Mission Mandate", Work in Progress, Internet-Draft, draft-mcguinness-mission-mandate, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-mandate>.
[I-D.draft-mcguinness-mission-orchestration]
McGuinness, K., "Mission Orchestration and Unwinding", Work in Progress, Internet-Draft, draft-mcguinness-mission-orchestration, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-orchestration>.
[I-D.draft-mcguinness-mission-runtime]
McGuinness, K., "Mission-Bound Runtime Enforcement", Work in Progress, Internet-Draft, draft-mcguinness-mission-runtime, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-runtime>.
[I-D.draft-mcguinness-mission-security-model]
McGuinness, K., "Mission Security Model", Work in Progress, Internet-Draft, draft-mcguinness-mission-security-model, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-security-model>.
[I-D.draft-mcguinness-mission-shaping]
McGuinness, K., "Mission Intent Shaping", Work in Progress, Internet-Draft, draft-mcguinness-mission-shaping, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-shaping>.
[I-D.draft-mcguinness-mission-substrate]
McGuinness, K., "Mission Substrate Requirements", Work in Progress, Internet-Draft, draft-mcguinness-mission-substrate, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-mission-substrate>.
[I-D.draft-mcguinness-oauth-mission]
McGuinness, K., "Mission-Bound Authorization for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission>.
[I-D.draft-mcguinness-oauth-mission-approval]
McGuinness, K., "Mission Deferred Approval for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-approval, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-approval>.
[I-D.draft-mcguinness-oauth-mission-attenuation]
McGuinness, K., "Mission Offline Attenuation for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-attenuation, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-attenuation>.
[I-D.draft-mcguinness-oauth-mission-child-delegation]
McGuinness, K., "Mission Child Delegation for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-child-delegation, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-child-delegation>.
[I-D.draft-mcguinness-oauth-mission-completion]
McGuinness, K., "Mission Completion for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-completion, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-completion>.
McGuinness, K., "Mission Consent Evidence for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-consent-evidence, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-consent-evidence>.
[I-D.draft-mcguinness-oauth-mission-cross-domain]
McGuinness, K., "Mission Cross-Domain Projection for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-cross-domain, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-cross-domain>.
[I-D.draft-mcguinness-oauth-mission-expansion]
McGuinness, K., "Mission Expansion for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-expansion, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-expansion>.
[I-D.draft-mcguinness-oauth-mission-management]
McGuinness, K., "Mission Management for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-management, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-management>.
[I-D.draft-mcguinness-oauth-mission-signals]
McGuinness, K., "Mission Lifecycle Signals for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-signals, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-signals>.
[I-D.draft-mcguinness-oauth-mission-status]
McGuinness, K., "Mission Status and Lifecycle for OAuth 2.0", Work in Progress, Internet-Draft, draft-mcguinness-oauth-mission-status, , <https://datatracker.ietf.org/doc/html/draft-mcguinness-oauth-mission-status>.
[RFC6749]
Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, , <https://www.rfc-editor.org/rfc/rfc6749>.
[RFC9126]
Lodderstedt, T., Campbell, B., Sakimura, N., Tonge, D., and F. Skokan, "OAuth 2.0 Pushed Authorization Requests", RFC 9126, DOI 10.17487/RFC9126, , <https://www.rfc-editor.org/rfc/rfc9126>.
[RFC9396]
Lodderstedt, T., Richer, J., and B. Campbell, "OAuth 2.0 Rich Authorization Requests", RFC 9396, DOI 10.17487/RFC9396, , <https://www.rfc-editor.org/rfc/rfc9396>.
[RFC9943]
Birkholz, H., Delignat-Lavaud, A., Fournet, C., Deshpande, Y., and S. Lasker, "An Architecture for Trustworthy and Transparent Digital Supply Chains", RFC 9943, DOI 10.17487/RFC9943, , <https://www.rfc-editor.org/rfc/rfc9943>.

Acknowledgments

This document is part of the Mission-Bound Authorization work and maps the structure that its profiles establish individually.

Author's Address

Karl McGuinness
Independent